How to Clean a Dyson Vacuum Filter the Right Way

If your Dyson Vacuum isn’t working like it used to, maybe the suction feels weak or it’s starting to give off that musty odor, there’s a chance that your filter is in dire need of pampering. The good part? You don’t have to buy new parts or spend hours figuring it out. Cleaning the Dyson vacuum filter is way too simple and easy, making a huge difference in how well your vacuum works.

Why Cleaning Your Dyson Filter Matters

One thing’s for sure, cleaning the filter regularly can help increase the longevity to extend the life of your Dyson. It’s also a wonderful habit to get used to if you are looking to maintain that healthy indoor air, especially giving an edge to those who have different allergies, pets, or kids who spend most of their time on the floor. Making it optimal and eco-friendly for everyone!

All in all, the solution works for all Dyson Models.

So you must be questioning, does it work for all models? Well, the answer to that question is a simple yes. Doesn’t matter what model you own, let it be V6, V8, V10, V11, or even new models, the process of cleaning the filter remains the same and standard, which is right to say that it’s fairly universal. Most of the Dyson vacuums are made with user-friendly maintenance in mind. Which means the filters can be removed, washed, rinsed, and dried without any tools or fancy products. And in this blog, we are willing to help and guide you through everything you need to know about your Dyson filter, from cleaning your vacuum to running it smoothly.

The Hidden Role of the Filter

Keeping your Dyson’s filter in the cleanest form matters more than you might think. What’s inside in every Dyson vacuum is a filter that traps and sucks all the microscopic dust and allergens that your vacuum sucks up. And with time, that filter tends to choke and get blocked with dust particles. And when it chokes, airflow is restricted, and your vacuum’s suction power cuts down on the power. Also, you might see that it won’t be picking up the crumbs like it used to. Also, a choked filter can cause long-term damage to the vacuum itself, so it’s crucial to keep it in the best running shape and condition to get the optimal cleaning you are looking for.

How Frequently Should You Clean It?

According to what Dyson says, the filter should be cleaned at least once a month under normal usage. If you vacuum every single day, or have feline fellows, or live in a certain area where dust is mostly trapped in the house, it might be safe to say that you should clean it more often. Luckily, the entire process doesn’t take too long; it barely takes a few minutes from cleaning it to drying, and a simple wash and service can make a world of difference.

What will you need to clean the filter?

The fact that you don’t need any specific tools or products to completely wash your Dyson’s filter makes the job way easier than anything else. Using a soap or putting the filter in the dishwasher could damage or break the filter. All you need is cold water, a towel, or a paper towel to dry it. Isn’t that simple? Something which is mostly available in every home! Feel free to wear a set of nice gloves if you are germophobic, but it’s not an essential requirement, though.

Step-by-Step Guide to Cleaning a Dyson Filter

Step 1: Power Off and Remove the Filter

To initially get started with it, you need to turn off the vacuum and disconnect it from the power outlet. Find the filter, usually located on the top of the handle or inside the cyclone assembly. Once it’s out, tap it nicely over a trash bin to knock out any loose particles and debris.

Step 2: Rinse Thoroughly with Cold Water

Okay, next up, properly wash the filter under cold water, make sure to hold it up right and let the water flow from both ends, make sure to squeeze gently to release the dirt that was trapped. And then you might be shocked to see how dark the water gets, but don’t stop there. Continue rinsing until the water seems to be crystal clear.

Note: Usage of hot water is strictly not recommended as it can damage the filter fibres.

source: Walmart

Step 3: Air Dry for a day

Now, let’s say that you are done with the washing process, and it’s time to shake off any unnecessary water that is trapped inside. First, set it on a clean towel in a warm, dry area to let it dry for at least a day. It’s crucial to let it completely dry. Placing a slightly damp filter into your Dyson can eventually lead to mould, causing damage to your motor. Also, avoid using a hair dryer, microwave, or placing it in direct sunlight, as heat can make the material shrink.

A Clean Filter = A Cleaner Home

We can say that the Dyson filter isn’t just about improving suction, it’s about protecting the investment you made. As these vacuums aren’t cheap, a little monthly makeover can help improve their longevity for years to come. Also, it’s nice to know that you are getting the best and the most optimal clean every time you vacuum.